We enabled quite a few USB drivers in the kernel config. The following list of devices is known to work, but it is by no means complete. Please let us know if you are successful with other devices and we will add them to the list.

USB Cables

• To use the USB OTG port of an Overo expansion board in host mode you must use: either a USB Mini-B to USB Standard-A Adapter cable for connecting to a USB device or the USB Mini-A to USB Mini-B adaptor cable for connecting to a USB hub.

Network Adaptors

• Ethernet
  • Hawking HUF11 10/100 Network Adapter
• WiFi
  • Trendnet TEW-424UB