Last Updated: December 12th, 2009

Gumstix' research and development plans for the Overo product line include:

• A backplane and Overo side-board to combine seven ((7) Overo COMs onto one Ethernet backplane.
• An expansion board for GPS location positioning and cell communications.
• An expansion board with a camera to connect to the 27-pin connector located on the top of each Overo COM.
• Plus additional Gumstix products that leverage the high function and low power of the OMAP processor on each Overo COM.
• Overo products built with extended temperature components: target of -40C < t < 85C. (please contact This e-mail address is being protected from spam bots, you need JavaScript enabled to view it if you are interested).

The following expansion board(s) for the Overo product line were recently released by Gumstix.

• Chestnut43: Combined 10/100baseT Ethernet and LCD-ready expansion board - to bring together the function of today's Tobi and Palo boards.
• Tobi-Duo: Dual Ethernet expansion board - ideal for Gumstix Overo-based appliances.
• Palo35: Expansion board for a 3.5" LCD screen
• Pinto-TH: A breakout board for product development.

A list of the expansion boards for the Overo series may be found here.

Note that each expansion board can be used with any of the Overo COM modules

 

Note: No announcements have been made by Gumstix related to these future expansion boards. All product plans are subject to change, including not happening at all.

======