Skip to content
Narrow screen resolution Wide screen resolution Auto adjust screen size Increase font size Decrease font size Default font size

gumstix developer site

Home arrow Documentation arrow Hardware Feature Overview Sheetsarrow Gumstix Overo COMs - Feature Overview
Gumstix Overo COMs - Feature Overview
 
Gumstix open source computing
   Gumstix Overo™ COM: a tiny, OMAP-based computer-on-module (COM)
 
   The Gumstix Overo series delivers Texas Instruments' OMAP applications processing power in a Linux-based computer-on-module series. 
 
    Companies and developers located in more than 50 countries use Gumstix Overo COMs as an embedded computer in a wide range of products.
  Highlights

  • Gumstix Overo offers "laptop-like performance in a stick-of-gum sized computer-on-module"
  • The Gumstix Overo series extends the function of Texas Instruments OMAP35x Applications Processors to a platform of leading I/O expandability.
  • The Overo motherboard, called a computer-on-module board or COM, is smaller than a stick of gum.
  • A wide range of expansion boards is available to create and produce new products sooner and at a lower cost.
  • Overo COMs can be clustered in groups of seven or by the hundreds via the Stagecoach expansion board.
  • Gumstix publishes the schematics of these expansion boards; these can be freely used as a reference designs for custom expansion boards.
  • OpenEmbedded package management enhances rapid product creation.
  • Open-source Linux is pre-loaded on each Overo COM
  • Product information and development information is available online 24/7.
  • Technical support comes from the large, diverse Gumstix community of more than 10,000 engineers in over 50 countries.
  Applications
  • Transportation & Location Tracking
  • Telecommunications
  • Industrial Automation & Control
  • Workforce Data Collection and Management
  • Retail Automation, Data Communications
  • Security and Power Management 
  • Embedded Computer
  • Robotics, Research & Development
  • Clustered OMAP computing
  Benefits
  • The Gumstix Overo series has been designed for prototyping, proof of concept and incorporation into a final product.
  • Each Gumstix Overo computer is an embedded Linux computer that can be programmed to perform in almost any industry.
  • Overo, as an embedded module, is ideal for customer products that have up to 50,000 EAU (annual sales).
  • The cluster computing power of the Stagecoach board can reduce native compile times and speed application development.
  • The modular design of the OMAP-based Overo series can lower development time and reduce the final product cost.
  Gumstix Overo series
  Computers-on-Module   
  • Gumstix Overo Fire computer-on-module (COM) 
  • Texas Instruments OMAP3530 Applications Processor with NEON™ SIMD Coprocessor, DSP & OpenGL
  • Bluetooth® (v2.0 + EDR) and 802.11g wireless communications
  • Overo Fire product page linked via here. 
  • Gumstix Overo Water computer-on-module (COM)
  • Texas Instruments OMAP3530 Applications Processor with NEON™ SIMD Coprocessor, DSP & OpenGL
  • Overo Water COM product page linked via here.
  • Gumstix Overo Air COM computer-on-module (COM)
  • Texas Instruments OMAP3503 Applications Processor
  • Bluetooth® (v2.0 + EDR) and 802.11g wireless communications
  • Overo Air COM product page linked via here.
  • Gumstix Overo Earth COM computer-on-module (COM)
  • Texas Instruments OMAP3503 Applications Processor
  • Overo Earth COM product page linked via here.
  Features common to each Overo computer-on-module:
  • Each Overo COM is an embedded, Linux single board computer (SBC)
  • 12mm x 12mm 515-pin s-PBGA package (CBB Suffix) TI OMAP35x Application processor
  • 600-MHz ARM Cortex™-A8 Core with hardware floating point, NEON technology and VFPv3 architecture.
  • 256MB Ram & 256 MB Flash POP (Package on Package) memory
  • Texas Instruments 65950 power management IC (posted via here) with 3 DC/DC's, 11 LDO's, Audio Codec, USB HS Transceiver and Charger
  • microSD card slot
  • 6 grams
  • 17mm x 58mm x 4.2mm (0.67 in. x 2.28 in. 0.16 in.)
  • Four (4) x #0 mounting holes: one in each corner of the Overo COM.
  • Commercial temperature operation: O deg C to 85 deg C
  • 3.3V - 4.2V supply voltage
  • Typical draw less than 1W (250 mA @ 4V with Wifi & Bluetooth® switched off)

  • Linux 2.6.31 or higher (Angstrom distribution)

  • OpenEmbedded build environment

  • Connector J1 - features the LCD, PWM and analog signals as posted via here.
  • Connector J4 - features the Extended Memory Bus and MMC signals as posted via here.
  • Connector J5 - features the camera control signals as posted via here
  Technical Details
   Review the information posted behind each of the six tabs of the product pages linked above.
  Introduction
   Videos introducing Overo COMs posted via here
  Signals

  Gumstix Overo COM: Signals document V1.3" (June 10th, 2010)  download here  

 Signals available via expansion board connectors:

  • 24-bit LCD signals,
  • 2 Peripheral Interrupts,
  • I2C signaling, PWM lines (6), UART, IR_UART PORT,
  • Audio line out (headset),
  • Pseudo differential MIC,
  • A/D (6 x 10 bits),
  • 1-wire signaling,
  • USB 2.0 OTG signals (Host or Client mode, USB), EHCI (USB 2.0 high-speed)
  • Address-bus chip selects, Address-bus control lines, Address lines 1:10
  • Data lines 0:15, SPI bus with 2 selects, 
  • IRQ lines
  • 8-bit MMC signals
  • Reset, Wake and power-on
  • Power and 1.8W supply, power, ground, backup
  • Camera input (12 bit)
  • 58mm x 17mm x 4.2mm

  Expansion Board Notes:

  •   Each expansion board of the Overo series can be connected to any Overo computer-on-module.
  •   The Thumbo board only provides enough power for the Overo Earth COM and the Overo Water COM.
 
  • To know what function is shipping on a Gumstix product at any given time, review the "Features" information presented on the board's product page at www.gumstix.com rather than depending upon the function designed into the schematic posted in pubs.gumstix.com. Gumstix makes this recommendation because function designed on to a Gumstix board (as per schematic) may not be populated during the build process.
 
    The 3D CAD layout of each expansion board has been published in pubs.gumstix.com in DXF, IGES, STEP and PDF formats.
 -- Thumbo board
 USB-powered DIP-style breakout board for Overo Earth COM an Overo Water COM
  with level shifters for use with a set of test pads.
           Thumbo product page
 -- Chestnut43 board
  LCD touch screen controller, 10/100baseT Ethernet,
   USB host, USB OTG and USB console
   Stereo audio and & 40-pin through-hole @ 1.8V logic
           Chestnut43 Product Page       Layout & Schematic* posted via here
   -- Tobi board
  DVI display controller, 10/100baseT Ethernet,
   USB host, USB OTG, USB console,
   Stereo Audio & 40-pin through-hole @ 1.8V logic
           Tobi Product Page       Layout & Schematic* posted via here
 -- Tobi-Duo board
  Dual-Ethernet
           Tobi-Duo Product Page       Layout & Schematic* posted via here 
 -- Palo35 board
   3.5" LCD touch screen controller, USB host, USB OTG, USB console,
   Stereo audio, accelerometer & 40-pin through-hole @ 1.8V logic
           Palo35 Product Page       Layout & Schematic* posted via here
 -- Palo43 board
   4.3" LCD touch screen controller, USB host, USB OTG, USB console,
   Stereo audio & 40-pin through-hole @ 1.8V logic
           Palo43 Product Page       Layout & Schematic* posted via here
 -- Summit board   DVI display controller,
   USB host, USB OTG, USB console,
   Stereo Audio & 40-pin through-hole @ 1.8V logic
           Summit Product Page       Layout & Schematic* posted via here
 -- Pinto-TH board
  DIP style breakout. USB OTG, 3.3V supply and level shifters for use with a set of test pads.
           Pinto-TH Product Page       Layout & Schematic* posted via here
 
Overo Fire with Palo43
  Release Date
  October 2008 (Gumstix Overo Earth COM) and April 2009 (Gumstix Overo Air COM, Gumstix Overo Fire COM and Gumstix Overo Water COM)
 Version Control  

  To determine the version of the bare PCB, bill of materials, and manufacturer work order used to build a specific Gumstix COM or expansion board, click here

  Benchmarks
  Benchmark information has been posted via here.
  On-board Wireless
 The Wi2Wi W2CBW003 System-in-Package (SiP): A complete IEEE 802.11b/g +Bluetooth® v2.0 +EDR radio solution based on the industry standard Marvell 8686 and Cambridge Silicon Radio architectures. (Gumstix Overo Air COM and Gumstix Overo Fire COM only).
 
  The spec sheet can be downloaded via here.
  Approval
  Meets FCC standards for wireless communications (as per Wi2Wi)
  Product roadmap
  The Overo series product roadmap is posted via here.
  Product Change Notices
  Product change notices posted via here.
  Setup & Programming
  Click here for Overo setup and software programming information
  JTAG

 Each Gumstix Overo COM has JTAG pads on the underside of the Overo COM board, located between the two 70-pin connectors. See "Gumstix Overo COM: Signals document V1.3" (June 1st, 2010)  download here  

  Temperature Range
  O deg C to 85 deg C
  More Overo operating temperature information has been posted via here.
 Overo Supply Voltage
 3.3V - 4.2V.
  Expansion boards can provide a layer of power management such as a 5v to 3,3V step-down regulator for use with 5V wall adapter.

 

Recent updates:

March 5, 2010: to add Gumstix Overo COM: Signals download

February 5th, 2010 to add link to Wi2Wi spec sheet.

 

 

 

 

Tags